Thank you for your interest in IAQA's Create Your Own Bundle. To purchase the Create Your Own Bundle, click the 'Purchase' button, add the item to your shopping cart and complete the checkout process. Read more
IAQA 2020 Annual Meeting Complete Bundle
- IICRC Standards Overview
- The Florida Mold Assessment: Industry Standard vs Standard Practice
- Unusual Odour Investigations & The Lessons Learned
- Sometimes Mold Remediation is Really Complicated
- What Other Information Do You Miss in Your Tape-Lift Samples and Direct Microscopic Tests?
- Performance Evaluation of Low Cost Sensors for IAQ Monitoring
- Time For a Paradigm Shift in Air Sampling for Mold
- The Elusive Chaetomium Mold: An Investigative Case Study
- Spore Trap Air Sampling for Mold: Limitations and FAQs
- Wildfire IEQ - Get Ready!
- New Building Construction and Microbial Issues
- Introduction to Hygrothermal Computer Modeling of Wall and Roof Assemblies
- Water Damage: It Is What It Is ... Or Is It?
- Legionella: Rapid Response for Outbreak Prevention
- Successful Vapor Mitigation Via Floor Coating and Engineering Controls: Potential Pitfalls and Lessons Learned
- Rise of Cannabis Legalization: Indoor Air Quality and Occupational Health Implications
- Air Scrubbers are Not Dehumidifiers - So What?
- Mold Removal...Don't Forget the Mycotoxins
- Combustion Residues in Residential and Commercial Buildings
- Mold, Mycotoxins, Endotoxins: Remediation for Hypersensitive Individuals
- Mold & Bacteria Growing Together to Make Little Ones
- Gas Stoves & Ultrafine Particles - An Overlooked Health Risk for Some Sensitive Persons?
- Wood Materials & Moisture Absorption: A Building Science Principle
- Are We Really Understanding Healthy Homes?
- Sustainable Design - Maximize Your Building Assets Like Never Before!
- Mold Assessment & Testing for Individuals with an Environmental Acquired Illness
- Attic Duct Sweating in the Humid South - Observations and Successful Corrections
- With Air, Take Better Care - A Novel Approach to Air Sampling for Allergens
- Occupational Safety and Health Management Systems and IAQ
- Radon: Still A Serious Source of Indoor Air Pollution
- Duct Leakage and How It Impacts IAQ
- Landmines: Are There Legal Consequences of Your Work?
- Assessing Spray Polyurethane Foam (SPF) Insulation Odors & Sensitivity Issues - Observations and Successful Corrections
- The Juggling Act: Providing Exceptional Customer Service & Increasing Productivity
IAQA 2021 Annual Meeting Complete Bundle
- Opening Keynote: Post-Covid Opportunities and the Biden Administration
- Fungal to Allergen Index (FAI): New Concept to Detect Mould Problems in Buildings
- HVAC and IAQ
- Building Owners Beware: The Insidious Threat of Water Vapor
- Case Studies of Residential IAQ Problems
- Uncontrolled Moisture: The Enemy of a Healthy Home
- A Systematic Approach to Examining the Building Envelope
- How Much of a Role Does HVAC Condensate Disposal Design Play in IAQ?
- Building Hygiene Assessments - Evaluating IAQ in Temporarily/Permanently Vacant Spaces
- Let's Get that HVAC Cleaned! Ventilation and New Technology in a Post SAR-CoV-2 World
- Environmental Testing Solution for COVID-19
- Emerging Trends in Indoor Air Quality Measurement
- Infection Control: Lessons Learned in 24 Regular Years & in a Single COVID-19 Year
- Selling Healthy; Setting Yourself Apart
- A Conversation with the Front Line: IAQ Experiences Working in the Field
- Keynote: IAQ Healthy Home Trends - Pandemic and Beyond
- Environmental Testings for COVID-19 Virus (SARS-CoV-2) and Its Suitable Surrogates
- How to Pivot Your Sales Strategy to Sell in the New Economy
- Legionella Prevention and Control Strategies in Building Water Systems
- Adapting to the "New Normal": Methods of Airborne Virus Detection for IAQ Professionals
- Air Quality Control: How Contractors Can Maximize IAQ Opportunities
- Fungal Assessment of Alaska Man Camps: To Sample or Not
- "Health" is an Unknown - Why That's Important to Know
- Building Hygiene Evaluations: When is it Suitable to Re-occupy?
- Committee Confidential 2021: IAQ Standards Development in ASTM and ISO
- AI + IAQ sensors = Best Indoor Air with Massive Energy Savings
- Verifying Ventilation and Filtration Engineering Controls: The Critical Role of Emerging Technology
- Indoor Air Quality Considerations in Healthcare Facilities ICRA Plans
- Nuances of the Primary Odor in Buildings: Sewer Gas Infiltration
- Mold Remediation Practices and their Association with Post Remediation Verification and Testing in Residential Structures
- Application of Digital Twin Technology in Indoor Air Quality Management
- Formaldehyde Exposure Risks and Social-Equity Issues
- My Remediation Disturbed Lead/Asbestos...Now What?
- Healthy Residential Air Through Proper Ventilation
- Moving Technology from Mold Remediation to Asbestos Abatement
- VOC Investigation - Techniques, Approach, and Instruments - Case Study
- An Investigation of the Impacts of Mechanical Ventilation and Heat Recovery System in Low Energy Domestic Building for Occupant Wellbeing
- Hidden Odors: From Initial Detection and Identification to Location and Correction Strategies
2022 IAQA Annual Meeting Complete Bundle
- Opening Keynote: From Improbably to Unstoppable
- Are You TILTed?
- The Pros and Cons of UV Germicidal Irradiation
- Mold and Lead: A Toxic Combination
- Case Study of Legionella Bacteria in Drinking Water Systems
- Dealing with Mold Sensitive Occupants/Clients
- Proposed "Standard" for Airborne Particulate Counters for Indoor/Outdoor Air Quality
- The Future of Design for IAQ
- How the InstaScope Saved Our Butt
- Radon Requirements for New Construction
- Build it Tight Let's Get it Right
- Dust Characterization Analysis – An important tool for IAQ Investigation
- Characterization of Residential Wildfire Smoke Residues
- More New Buildings, More New Problems
- More New Buildings, More New Problems
- Moldy Myths & Misperceptions - Twenty Years as an Indoor Mold Consultant
- Ask the Experts Anything
- Assessment Considerations in Fire Damaged Residential Structures
- Assessing Water Damage for Insurance Claims
- Benefits of Sampling for Bioaerosols Shown Through Real-World Case Studies
- Spray Polyurethane Foam (SPF) Insulation Investigations
- Bio Recovery Site Risk Assessment
- Technical Keynote: (Near) Real-Time Characterization of Airborne Microbes in our Built Environment: Myths, Reality and Translating Useful Technology into Practice
- IAQ Investigations & Hyper-Sensitive Occupants
- Real-Time Indoor Air Quality (IAQ) Data Drives Modern Building Management
- Advancing capabilities in Biological Response (ABRA)
- Wood Floor Failures on Concrete Slab: It's All About the Vapor Drive
- The Impact of Real-Time Indoor Air Quality Monitoring in the Built Environment
- Houseless Camp Impact Reduction
- Investigation of Spray Foam Insulation Odor Sources Using Air Testing Combined with Off Gas Sampling of Surfaces and Substrates
- DFS - an Extremely Useful Technology in This New Challenging World
- IAQ in Schools: Is Mercury Hiding in the Gym Floors?
- Indoor Air Quality Assessments
- Green Building TVOCs Too High? Common Chemical Culprits and Sources
- Energy Efficiency Building Techniques and Their Effects on IAQ
- Meeting of the Membership 2022
- Increasing Revenues by Safeguarding Good IAQ
Create Your Own Bundle - 50 Classes
- REME 101 - Introduction to Mold Remediation
- REME 102 - Personal Protective Equipment
- REME 103 - Engineering Controls
- REME 104 - Contaminant Removal
- REME 105 - Antimicrobial Use
- REME 106 - Remediation Plans and Verification
- HVAC 101 - Residential HVAC Systems
- HVAC 102 - Commercial HVAC Systems
- HVAC 103 - Media Filtration
- HVAC 104 - Air Cleaning
- HVAC 105 - Ventilation
- HVAC 106 - Ventilation Standards
- HVAC 107 - HVAC and Humidity
- HVAC 108 - HVAC Maintenance and Hygiene
- ASMT 102 - Walk Through Inspections
- ASMT 106 - Introduction to Sampling and Report Writing
- ASMT 101 - Gathering Information
- ASMT 103 - Assessing Temperature and RH
- ASMT 104 - Assessing Ventilation and Pressurization
- ASMT 105 - Assessing Moisture
- BSCI 101 - Introduction to Psychrometrics
- BSCI 102 - Using the Psychrometrics Chart
- BSCI 103 - Managing Moisture I
- BSCI 104 - Managing Moisture II
- CONT 101 - Mold
- CONT 102 - Bacteria
- CONT 103 - Viruses
- CONT 104 - Allergens
- CONT 105 - VOCs
- CONT 106 - Radon
- CONT 107 - Carbon Monoxide
- CONT 108 - Other IAQ Contaminants
- IAQU 101 - Introduction to IAQ
- IAQU 102 - IAQ and Health
- IAQU 103 - Building Related Illness
- IAQU 104 - Preventing IAQ Problems I
- IAQU 105 - Preventing IAQ Problems II
- IAQU 106 - IAQ Management
- IAQU 107 - Handling IAQ Complaints
- IAQU 108 - Regulations, Standards, and Guidelines
- IAQU 109 - Exposure Guidelines
- SAMP 101 - Air Sampling for Mold, Part I
- SAMP 103 - Surface Sampling for Mold
- SAMP 102 - Air Sampling for Mold, Part II
- SAMP 104 - Other Sampling for Mold
- SAMP 105 - Sampling for Bacteria
- SAMP 106 - Sampling for Allergens
- SAMP 107 - Measuring Particulate Matter
- SAMP 108 - Measuring VOCs
- SAMP 109 - Measuring Carbon Monoxide
- Webinar: Cold Weather in a Hot, Humid Environment
- Webinar: Methods for Interpreting Airborne Mold Samples
- Webinar: Mold Assessment in Accordance with the ASTM D7338
- Webinar: Mold Growth Indoors- Update on Responses, Effects, Management, & Assessment
- Webinar: Sample "Outside the Box"
- Webinar: Updates on Microbiological Testing for Indoor Environmental Quality Investigation – Traditional and DNA (ERMI) Methods
- Webinar: Emerging Issues- What's Headed Our Way (and is it a scooter or a semi?)
- Webinar: Evaluating Post-Fire Smoke Contamination in Indoor Air
- Webinar: Find That Smell
- Webinar: Indoor Particulate Matter & Health for IEQ Professionals
- Webinar: Multiprocessing for IAQ Instrumentation
- Webinar: Smelly Buildings: Containing Odors and Creating Indoor Air Quality
- Webinar: Spray Polyurethane Foam Insulation- Build it Tight & Ventilate it Right
- Webinar: Using Airborne Samples to Assess Occupant Exposure Potential
- Webinar: VOC and Cannabis - Smell Mitigation Technologies
- Webinar: What's That Smell?
- Webinar: Adventures in Building Science: People, Pollutant, Path, Pressure
- Webinar: IEQ 101 or How to Perform an Initial Investigation
- Webinar: Healthy Homes Part 3: Housing Interventions Health - What Research Tells Us
- Webinar: Healthy Homes Part 2: Assessments - An Overview of Principles & Practice
- Webinar: Healthy Homes Part 1: What We Know About Housing and Its Health Impact
- Webinar: Hospital Construction Monitoring – A Case Study in YES!
- Webinar: Infection Prevention Considerations in Healthcare Design, Construction and Maintenance
- Webinar: Managing the Presence of Legionella in Building Water Systems: A Preventive Framework
- Webinar: When Green Goes Bad: Examples of Unintended Indoor Environmental Quality Consequences
- Webinar: Mighty Mites and Other Microarthropods
- IICRC Standards Overview
- The Florida Mold Assessment: Industry Standard vs Standard Practice
- Unusual Odour Investigations & The Lessons Learned
- Sometimes Mold Remediation is Really Complicated
- What Other Information Do You Miss in Your Tape-Lift Samples and Direct Microscopic Tests?
- Performance Evaluation of Low Cost Sensors for IAQ Monitoring
- Time For a Paradigm Shift in Air Sampling for Mold
- The Elusive Chaetomium Mold: An Investigative Case Study
- Spore Trap Air Sampling for Mold: Limitations and FAQs
- Wildfire IEQ - Get Ready!
- New Building Construction and Microbial Issues
- Introduction to Hygrothermal Computer Modeling of Wall and Roof Assemblies
- Water Damage: It Is What It Is ... Or Is It?
- Legionella: Rapid Response for Outbreak Prevention
- Successful Vapor Mitigation Via Floor Coating and Engineering Controls: Potential Pitfalls and Lessons Learned
- Rise of Cannabis Legalization: Indoor Air Quality and Occupational Health Implications
- Air Scrubbers are Not Dehumidifiers - So What?
- Mold Removal...Don't Forget the Mycotoxins
- Combustion Residues in Residential and Commercial Buildings
- Mold, Mycotoxins, Endotoxins: Remediation for Hypersensitive Individuals
- Mold & Bacteria Growing Together to Make Little Ones
- Gas Stoves & Ultrafine Particles - An Overlooked Health Risk for Some Sensitive Persons?
- Wood Materials & Moisture Absorption: A Building Science Principle
- Are We Really Understanding Healthy Homes?
- Sustainable Design - Maximize Your Building Assets Like Never Before!
- Mold Assessment & Testing for Individuals with an Environmental Acquired Illness
- Attic Duct Sweating in the Humid South - Observations and Successful Corrections
- With Air, Take Better Care - A Novel Approach to Air Sampling for Allergens
- Occupational Safety and Health Management Systems and IAQ
- Radon: Still A Serious Source of Indoor Air Pollution
- Duct Leakage and How It Impacts IAQ
- Landmines: Are There Legal Consequences of Your Work?
- Assessing Spray Polyurethane Foam (SPF) Insulation Odors & Sensitivity Issues - Observations and Successful Corrections
- The Juggling Act: Providing Exceptional Customer Service & Increasing Productivity
IAQA 2020 Annual Meeting 20 Course Bundle
- IICRC Standards Overview
- The Florida Mold Assessment: Industry Standard vs Standard Practice
- Unusual Odour Investigations & The Lessons Learned
- Sometimes Mold Remediation is Really Complicated
- What Other Information Do You Miss in Your Tape-Lift Samples and Direct Microscopic Tests?
- Performance Evaluation of Low Cost Sensors for IAQ Monitoring
- Time For a Paradigm Shift in Air Sampling for Mold
- The Elusive Chaetomium Mold: An Investigative Case Study
- Spore Trap Air Sampling for Mold: Limitations and FAQs
- Wildfire IEQ - Get Ready!
- New Building Construction and Microbial Issues
- Introduction to Hygrothermal Computer Modeling of Wall and Roof Assemblies
- Water Damage: It Is What It Is ... Or Is It?
- Legionella: Rapid Response for Outbreak Prevention
- Successful Vapor Mitigation Via Floor Coating and Engineering Controls: Potential Pitfalls and Lessons Learned
- Rise of Cannabis Legalization: Indoor Air Quality and Occupational Health Implications
- Air Scrubbers are Not Dehumidifiers - So What?
- Mold Removal...Don't Forget the Mycotoxins
- Combustion Residues in Residential and Commercial Buildings
- Mold, Mycotoxins, Endotoxins: Remediation for Hypersensitive Individuals
- Mold & Bacteria Growing Together to Make Little Ones
- Gas Stoves & Ultrafine Particles - An Overlooked Health Risk for Some Sensitive Persons?
- Wood Materials & Moisture Absorption: A Building Science Principle
- Are We Really Understanding Healthy Homes?
- Sustainable Design - Maximize Your Building Assets Like Never Before!
- Mold Assessment & Testing for Individuals with an Environmental Acquired Illness
- Attic Duct Sweating in the Humid South - Observations and Successful Corrections
- With Air, Take Better Care - A Novel Approach to Air Sampling for Allergens
- Occupational Safety and Health Management Systems and IAQ
- Radon: Still A Serious Source of Indoor Air Pollution
- Duct Leakage and How It Impacts IAQ
- Landmines: Are There Legal Consequences of Your Work?
- Assessing Spray Polyurethane Foam (SPF) Insulation Odors & Sensitivity Issues - Observations and Successful Corrections
- The Juggling Act: Providing Exceptional Customer Service & Increasing Productivity